{"product_id":"roamiq-chip-4-channel-rgbw-light-dimmer","title":"ROAMiQ Chip: 4-Channel RGBW Light Dimmer","description":"\u003cp\u003eAdd full-color, ROAMiQ-ready lighting control to your vehicle.\u003c\/p\u003e\n\u003cp\u003eThe ROAMiQ 4-Channel RGBW Light Dimmer controls a complete RGBW LED strip — or up to four independent lighting zones — directly through the ROAMiQ ecosystem. Each channel is rated for up to 7 amps, with up to 28 amps total across the module, allowing control of up to 336 watts of 12V LED lighting from a single compact unit.\u003c\/p\u003e\n\u003cp\u003eBuilt for campervans, RVs, overland vehicles, marine builds, and specialty vehicles, this module gives installers a simple way to add color and multi-zone dimmable lighting without relying on third-party apps, separate setup processes, or disconnected control hardware.\u003c\/p\u003e\n\u003cp\u003eOnce installed, the lighting can be controlled from ROAMiQ, from connected wall switches, or as part of automated scenes and routines.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlug-and-Play with ROAMiQ\u003c\/strong\u003e\u003cbr\u003eDesigned to work directly with ROAMiQ. No Shelly app, no separate cloud account, no extra setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFour Channels: 7A Per Channel, 28A Max\u003c\/strong\u003e\u003cbr\u003eEach channel supports up to 7 amps (about 84 watts at 12V), with up to 28 amps total across all four channels (about 336 watts of 12V LED lighting load).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThree Channel Modes\u003c\/strong\u003e\u003cbr\u003eChoose the mode that matches the install:\u003cbr\u003e• \u003cstrong\u003eRGBW\u003c\/strong\u003e — one 4-wire RGBW strip with full color and white control\u003cbr\u003e• \u003cstrong\u003eRGB + W\u003c\/strong\u003e — an RGB strip plus a separate dimmable white zone\u003cbr\u003e• \u003cstrong\u003e4x Independent\u003c\/strong\u003e — four separate single-color dimmable lighting zones\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccurate Color\u003c\/strong\u003e\u003cbr\u003eColor output is gamma-corrected, so the color you pick in ROAMiQ is the color you see on the strip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFour Built-In Switch Inputs\u003c\/strong\u003e\u003cbr\u003eConnect up to four momentary wall switches. Switch 1 controls on\/off and dimming; switches 2–4 recall saved color presets in RGBW modes, or control channels 2–4 in 4x Independent mode.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSaved Color Presets\u003c\/strong\u003e\u003cbr\u003eSet a color in ROAMiQ, save it to a preset, and recall it instantly from a wall switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePress-and-Hold Dimming\u003c\/strong\u003e\u003cbr\u003ePress and hold a switch for smooth dimming control. Release at the brightness you want.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDouble-Tap Full Brightness\u003c\/strong\u003e\u003cbr\u003eTwo taps brings the lighting directly to 100% brightness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePer-Channel Power Monitoring\u003c\/strong\u003e\u003cbr\u003eEvery channel has its own current sensor, so ROAMiQ can see exactly what each lighting zone is drawing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOvercurrent Protection\u003c\/strong\u003e\u003cbr\u003eConfigurable per-channel and total current limits shut the outputs off and report a fault in ROAMiQ if a load draws more than it should. Each channel is also individually fused on the board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower-On Behavior\u003c\/strong\u003e\u003cbr\u003eChoose whether lights restore their last state, always start off, or always start on when power returns.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOver-the-Air Updates\u003c\/strong\u003e\u003cbr\u003eFirmware updates are delivered through ROAMiQ, so the module keeps improving after installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStraightforward Wiring\u003c\/strong\u003e\u003cbr\u003eBuilt with installers in mind, using a clear wiring layout and straightforward wiring diagram for a clean, repeatable installation.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 4 (RGBW, RGB + W, or 4x Independent)\u003c\/li\u003e\n\u003cli\u003eInput voltage: 12V DC\u003c\/li\u003e\n\u003cli\u003eOutput per channel: 7A max (≈84W at 12V)\u003c\/li\u003e\n\u003cli\u003eTotal output: 28A max (≈336W at 12V)\u003c\/li\u003e\n\u003cli\u003eOutput type: PWM dimming, common-positive (common-anode) LED loads\u003c\/li\u003e\n\u003cli\u003eSwitch inputs: 4, momentary contact to ground\u003c\/li\u003e\n\u003cli\u003eCurrent sensing: individual sensor on each channel\u003c\/li\u003e\n\u003cli\u003eProtection: per-channel fuses, configurable per-channel and total current limits\u003c\/li\u003e\n\u003cli\u003eConnectivity: Wi-Fi, ROAMiQ native\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommon Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRGBW and RGB accent lighting\u003c\/li\u003e\n\u003cli\u003eAwning and exterior scene lighting\u003c\/li\u003e\n\u003cli\u003eUnder-cabinet and toe-kick lighting\u003c\/li\u003e\n\u003cli\u003eCeiling cove lighting\u003c\/li\u003e\n\u003cli\u003eMulti-zone interior lighting (up to four zones from one module)\u003c\/li\u003e\n\u003cli\u003eGalley, bed, and reading lights\u003c\/li\u003e\n\u003cli\u003eGarage and cargo area lighting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy It Matters\u003c\/h3\u003e\n\u003cp\u003eLighting sets the feel of every vehicle build. The ROAMiQ 4-Channel RGBW Light Dimmer brings color and multi-zone lighting into the same intelligent control environment as the rest of the vehicle.\u003c\/p\u003e\n\u003cp\u003eThat means one module instead of several, color control from ROAMiQ, physical switch compatibility, and the ability to include lighting color and brightness in scenes such as Sleep Mode, Camp Mode, Away Mode, Night Mode, or Entry Mode.\u003c\/p\u003e\n\u003cp\u003eNeed more than 7 amps on a single circuit? Pair it with the ROAMiQ Single-Channel Light Relay with Dimmer, rated for 12 amps.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDesigned for use with ROAMiQ systems and compatible 12V common-positive LED lighting loads. Not compatible with addressable (pixel \/ RGBIC) LED strips.\u003c\/p\u003e\n\u003cp\u003eMaximum supported load is 7 amps per channel and 28 amps total. Do not exceed the rated output capacity. Verify lighting load, wiring size, fuse protection, switch type, and installation requirements before use.\u003c\/p\u003e\n\u003ch3\u003eImportant Installation Notes\u003c\/h3\u003e\n\u003cp\u003eProfessional installation is recommended. Proper wire sizing, fuse protection, polarity, load calculation, switch wiring, and system testing must be completed before use. Switch inputs accept a contact to ground only — never connect 12V to a switch input.\u003c\/p\u003e\n\u003cp\u003eThe installer is responsible for confirming that the connected LED lighting load is compatible with the ROAMiQ 4-Channel RGBW Light Dimmer and that all controls operate safely and correctly after installation.\u003c\/p\u003e\n","brand":"ROAMiQ","offers":[{"title":"Default Title","offer_id":71483558559997,"sku":"RQ-RGBW-LDM","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0662\/5846\/9117\/files\/BlackandWhiteAbstractShadowComingSoonInstagramPost_36.png?v=1792073680","url":"https:\/\/upfitterswholesale.com\/products\/roamiq-chip-4-channel-rgbw-light-dimmer","provider":"Upfitters","version":"1.0","type":"link"}